R-9285 for Seats between 385mm and 409mm at the Mount Point
R-9285 for Small Seats

Alternative Views:

For mounting aftermarket seats to direct to the drivers & passenger side floor
MSRP: $236.24

BK Part Number: R-9285

Description Installation Instructions
Material: 11 gauge, type 304, stainless steel
Finish: Powder-coated in durable black wrinkle-finish
Weight: 4.5 lbs
Models: Mounts seats with a width between 385mm to 409mm to BMW F8X and F22 Series floor

The R-9285 fits seats between 385mm to 409mm wide at the side mount mounting point.

Features and Benefits:

-The R-928X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.

R-928X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alteration to the car is required.

R-928X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses.

-Due to not using a floor mount adaptor or sliders, the R-928X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.

R-928X seat mounts weight 6-7 lbs per seat. Traditional adaptor/slider/mount/belt mount point solutions can often weigh in excess of 20 lbs per seat.

-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength.

R-928X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.

-If a fire extinguisher mount is desired, all
R-928X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520/9530 quick release mount or the stock 3 lb Amerex bottle mount.

Related Parts:
R-9258 Sub Strap Mount for R-928X Series Side Mounts
R-2295 Fire Extinguisher Mount for R-928X Series Side Mounts

Browse for more products in the same category as this item:

BMW/Mini > BMW F30/80 > Seat Mounts for BMW F30/F80 M3 > Direct to Floor Seat Mounts
BMW/Mini > BMW F82 > Seat Mounts for BMW M4 F82 > Direct to Floor Seat Mounts
BMW/Mini > BMW F87 M2 > Seat Mounts for BMW F87 M2 > Direct to Floor Seat Mounts